Understanding Alternating Current vs Direct Current – A Guide to Charging Your Electric Vehicle

Source: Date:

Refueling a conventional gasoline or diesel vehicle requires almost no thought – you pull up, fill the tank in a couple of minutes, pay for the liters you pumped, and drive off. Electric vehicle ownership works differently. Charging is a core part of the ownership experience, and understanding how it works can genuinely improve your day-to-day satisfaction with your EV.

For most EV drivers, home becomes the primary "gas station," which means you'll want to understand your household electrical setup and how your car's charging hardware interacts with it. When you venture out to public charging points, other variables come into play – like the maximum output of the charger itself and how much power your vehicle can actually accept. Let's break down the fundamentals of how electricity flows into your EV's battery.

Hyundai Ioniq 5 at a public AC/DC charging station

How AC charging works

The vast majority of EV charging sessions around the world happen through AC charging. The concept behind it is straightforward: whether you plug into a household outlet or a public charging point, the electricity supplied is alternating current (AC). Your car's on-board charger then converts that AC power into direct current (DC), which is what the battery actually stores.

Figuring out how fast your car can charge requires two pieces of information: the electrical specifications of your home installation or public charging point, and the capabilities of your vehicle's on-board charger.

Homes are wired with either single-phase or three-phase electricity. For single-phase installations, power is calculated using the formula P = V × I. In Europe, single-phase voltage is standardized at 230V, so multiplying voltage by amperage gives you the available charging power.

As a practical example: a 230V supply paired with a 32A circuit yields 7.36 kW of charging power (230V × 32A). Three-phase installations are more powerful – with 400V and 32A, the formula becomes P = V × I × √3, which works out to 400V × 32A × 1.732 = 22 kW. Clearly, a three-phase setup delivers substantially more power than its single-phase counterpart.

Mercedes-Benz EQS domestic AC charging station

Now for the vehicle side of the equation. When your car's on-board charger matches the capacity of the electrical installation, you get the full available power. Consider the Mercedes-Benz EQS equipped with the optional 22 kW on-board charger – paired with a three-phase installation and the appropriate wallbox, it charges at the full 22 kW. However, if you plug that same car into a standard schuko (type F) household socket, which typically handles 10A, you'll be crawling along at just 2.3 kW.

Estimating charging time requires two numbers: your battery's usable capacity in kWh and your effective charging power. Take a vehicle with a 50 kWh battery, an 11 kW on-board charger, and a typical charging efficiency of 94% – the math gives you 50/(11 × 0.94) = 4 hours and 50 minutes. Keep in mind this is a theoretical figure, and real-world results depend on the vehicle's charging curve. That said, at the lower power levels typical of home charging, you'll usually get quite close to the calculated figure.

*Assumption: Vehicle consumption 18 kWh/100 km

How DC charging works

DC fast charging is a much simpler affair. Since the charging station delivers direct current and your EV's battery stores direct current, the on-board charger plays no role whatsoever. The maximum charging rate comes down to just two things: the battery's own specifications and what the fast charger is capable of delivering.

Most EVs on the road today use 400V battery systems, but a new generation of vehicles has adopted 800V+ architectures – including the Porsche Taycan, Audi E-Tron GT, Hyundai Ioniq 5, Kia EV6, and Lucid Air. These vehicles can accept charging power up to 350 kW when connected to compatible 800V chargers.

Audi e-tron GT can charge with up to 270 kW DC

Battery cooling also affects DC charging speeds. The majority of modern EVs feature liquid-cooled battery packs, which is essential for managing the heat generated during rapid charging. Vehicles with passively air-cooled batteries generally cap DC charging at around 50 kW to prevent the battery from overheating.

Another important practice: automakers generally recommend stopping DC charging at 80% state of charge. Beyond that threshold, charging speed falls off dramatically, and continued fast charging accelerates battery degradation – so pushing to 100% on a fast charger rarely makes sense.

*Assumption: Vehicle consumption 18 kWh/100 km

Was going all-DC the road not taken?

Here's a thought that might raise some eyebrows: charging electric cars would be fundamentally simpler if the industry had committed to DC from the start. If EVs relied exclusively on DC charging, the on-board charger could be eliminated entirely – making vehicles lighter and less expensive to build – and owners would no longer need to carry charging cables in their trunk or frunk.

On the home front, drivers would use DC wallboxes with power outputs up to 22 kW, comparable to today's AC wallboxes. Domestic DC wallboxes do exist on the market, but they currently command a premium of five to seven times the price of AC units. However, if every manufacturer had committed to DC-only charging, economies of scale would have driven those prices down dramatically.

In hindsight, this decision arguably should have been made at the dawn of the e-mobility era – yet it wasn't. Some might call it one of the most significant missed opportunities in the history of electric mobility.

ABB 24 kW DC wallbox
Scroll to Top